Graphviz: Spline-o-Matic

Spline-o-matic is an edge router that draws Bezier curves in diagrams. It comes with a TCL/tk interface for tests and demos.

The library accepts as input:

  • two endpoints

  • optional endpoint tangent vectors

  • an admissible region where a curve may be drawn to connect the endpoints

It returns a Bezier curve that connects the endpoints and stays within the admissible region. The curve is smooth and close to a shortest path.

Spline-o-matic Solves Two Types of Problems

In the first case, the input is a simple polygon, with the two endpoints must be inside it. The result curve stays within the control polygon.

In the second case, the input is a list of polygonal obstacles or "holes" to be avoided, along with the endpoints. The result curve does not pass through any obstacle . (If an endpoint is inside an obstacle, it is ignored for the given route. This is convenient for routing node-link diagrams.)

Curves are routed individually, not globally, so the edge router does not prevent them from crossing. An interesting improvement to this library would be introduce some notion of global planning to prevent unwanted edge crossings. The library interface to Spline-o-matic exposes its main algorithms so they may be invoked independently for efficiency and flexibility.

Curves are computed in two phases. The first phase finds a shortest path (a polyline) between endpoints. As described previously, there are two variants. Routing inside a polygon is solved by an efficient algorithm due to Overmars and Welzl, but routing around obstacles involves computing the visibility graph of the obstacles' vertices, for which we employ the standard O(N^3) algorithm. When more than one edge route is to be found, it is much faster to precompute and re-use the visibility graph, than to compute it for each route.

The second phase takes an arbitrary simple path (usually a shortest path computed by the first phase) and a list of barrier segments (usually sides of a control polygon or of obstacles) and produces a Bezier curve that does not touch a barrier except on an endpoint. Note that the barriers are not required to form polygons.

Here is the library API. Polygons must always be presented in clockwise order!

#include <pathgeom.h>

/* open a visibility graph */
vconfig_t *Pobsopen(Ppoly_t **obstacles, int n_obstacles);

/* close a visibility graph, freeing its storage */
void Pobsclose(vconfig_t *config);

/* route a polyline from p0 to p1, avoiding obstacles.
 * if an endpoint is inside an obstacle, pass the polygon's index >=0
 * if the endpoint is not inside an obstacle, pass POLYID_NONE
 * if the endpoint location is not known, pass POLYID_UNKNOWN
 */

int Pobspath(vconfig_t *config, Ppoint_t p0, int poly0,
	Ppoint_t p1, int poly1, 
	Ppolyline_t *output_route);

#define POLYID_NONE		-1111
#define POLYID_UNKNOWN	-2222

/* find shortest euclidean path within a simple polygon */
extern int Pshortestpath(Ppoly_t *boundary, Ppoint_t endpoints[2],
    Ppolyline_t *output_route);

/* fit a spline to an input polyline, without touching barrier segments */
extern int Proutespline (Pedge_t *barriers, int n_barriers,
    Ppolyline_t input_route, Pvector_t endpoint_slopes[2],
    Ppolyline_t *output_route);

/* utility function to convert from a set of polygonal obstacles to barriers */
extern int Ppolybarriers(Ppoly_t **polys, int npolys, Pedge_t **barriers, int *n
_barriers);

#endif

Distribution

The source release is on our download page. Considerable software know-how is needed to work with it. The GUI is written in TCL. The path planner is built as a static library. The TCL layer includes this and other functions as a dynamic library.

GUI

The package has a C library interface and a TCL/tk GUI (contributed by John Ellson, ellson@research.att.com) for demos and debugging. Run pathtest.tcl (or tclsh pathtest.tcl). The GUI permits drawing obstacle polygons (use button 1 to place vertices and button 2 to place the last vertex of a polygon).

pathtest comes with a few sample obstacle configurations. To try it, run pathtest.tcl. load an example, click on the Bezier radio button, and use mouse button 1 and 2 to sweep a line segment. A curve will be routed between its endpoints. The choice of routing inside a polygon or routing around obstacles depends on the endpoints.

References

Implementing a General-purpose Edge Router: Paper, Quicktime video.